Lot of 3 pcs XADO REVITALIZANT EX120 Gasoline and LPG engines 9ml. Original.

Description

XADO EX120 REVITALIZANT for gasoline and LPG engines.
Original product. Made in Ukraine.
Designed to protect against wear and repair of gasoline and gas engines, including boosted and turbocharged.
Due to the 20% higher * concentration of the active substance has an expanded margin for the restoration of worn surfaces and their protection against wear.
Forms a metal-ceramic coating on the surfaces of friction pairs (engine parts restore their geometry). As a result, the updated unit is superior to the new in its performance characteristics and is guaranteed to last 2-4 times longer.
Advantages
Restores and protects from wear friction details of the cylinder-piston group, crank-rod and gas-distributing mechanisms
Significantly reduces fuel consumption (up to 30% at idle)
Increases to nominal oil pressure in the system
Smoothes and increases compression in the cylinders
Increases engine power, improves its intake
Reduces noise and vibration by 10 times
Increases the service life of nodes by 2-3 times
Protects the engine from the negative effects of "cold start"
Improves engine performance after 50-100 km (30-60 miles)
Allows operation of the engine at emergency leakage of oil to 300 km (185 miles)
Application procedure:
Processing of the engine is carried out in three stages
Stage 1: Make the contents of the syringe into the oil filler neck of the engine warmed up to operating temperature. Start the engine and let it idle for 5-10 minutes
2nd stage: carried out in the same order after 100-250 km (60-150 miles)
The third stage: is carried out in the same order through 100-250 km
(60-150 miles)
of run
Processing is considered to be completed after at least 1500 km (900 miles).
Oil system volume: 3-10 L
Number of tubes (9ml) : 3 pcs
Scheme: 1-1-1
Number of tubes for new engines: 2
Oil system volume: 11-20 L
Number of tubes (9ml) : 6 pcs
Scheme: 2-2-2
Number of tubes for new engines: 4
Oil system volume: 21-30 L
Number of tubes (9ml) : 9 pcs
Scheme: 3-3-3
Number of tubes for new engines: 6
Notes
It is not recommended to change the oil before the end
Idling is possible (4 hours - equivalent to 200 km (125 miles))
New engines with a mileage of up to 20,000 km (12500 miles) can be processed in one go
Engines after overhaul are recommended to be processed in the usual way in three stages
Treatment of liquefied natural gas engines is similar to the treatment of gasoline engines
Protective cermet coating is formed on any working mechanism, however, if the mechanism (engine) is in critical condition (100% wear), it is necessary to replace the destroyed parts.
Worldwide shipping via airmail with tracking number.