Library Loft Ladder Hardware Kit - LADDER STANDS UP! Powder Coating! Any width!

Description

Welcome to
CountryNeighbors
•
com
A family owned and operated company making LOG HOME FURNISHINGS since 1996
.
We have had such a positive response to our Library Ladder design,
we offer a LIBRARY HARDWARE KIT to convert your own ladder to STAND UP against the wall!
See our ladder ad on eBay if you need a ladder also, search:
"CUSTOM LOFT LADDER"
NEW
:
We just added
POWDER COATING!!!
Comes
Satin-Black
or
Gloss-White
, extra /ft (see last two photos).
Powder Coating is AMAZING stuff. Very durable, silky-smooth and just the right slipperiness you need between the metal surfaces.
ABOUT THIS KIT
:
1. Makes your ladder STAND UPRIGHT when not in use.
2. Slides up/back (and right/left if you order a wider bar).
3. Easily lifts off the bar! Or check out our "C" brackets (third photo).
Our Brackets are heavy-duty 1/4 x 3/4 strap steel (load tested to 500lb) and we use special pipe that DOES NOT show the threads!
This design is so simple, functional and affordable.
Ask for:
---> "J" Brackets (photo 1) the ladder can be removed or ...
--->"C" Brackets (photo 3) NOT removed. Good for camps and rental property,
or ...
---> "L" Brackets (photo 4) mounts on top of the ladder. MUST be used if the ladder DOES NOT extend past the loft edge.
All of the above, the same price, just let us know.
How to figure Bracket Length of travel:
1. Pull your ladder out to the preferred angle, and (make a mark on the loft edge if the ladder DOES NOT extend past the loft for "L" Type brackets or) make a mark on the back of the ladder...
2. Then hold your ladder straight up and measure the difference.
3. We will add three inches to that measurement to be SAFE! ;o)
BAR Width:
You can tell us just the width you want --->
1. Just the bar width.  We will add the fittings to that (about 4.25 inches). Or...
2. Tell us the total END-to-END measurements, Or...
3. If you need to hit a stud, tell us STUD-to-STUD width.
Comes with:
All the lags you need and a lag-driver.
1/4" thick felt pads for the bottom of your ladder.
FELT IS BETTER! NO CASTERS TO SCRATCH YOUR HARDWOOD FLOOR!
Bar and fittings come fully assembled. All you need is a drill/driver and a ladder!
IDEA!
---->
A lot of customers are buying our bars as GRAB-BARS at the top. So order the extra footage for this and tell us what you want. EG: If you want a 2ft horizontal bar for your ladder and two 2ft vertical bars for the top, order 6ft and tell us what you want. ;o)
If you need 8ft or more width on the bar, we suggest you order "Kit w/o pipe" and buy a 3/4" black-iron pipe locally.
S/H:
FREE S/H!!! Ships PRIORITY MAIL! Larger orders ship UPS.